|

Align Off-Air OTA
TV antennas quickly, optimize and aim digital
and analog with the press of a few buttons.
Developed for the exact alignment and adjustment
of Terrestrial Antennas (OFF-AIR) for over the
air OTA reception.
| • Easy
to use with compact design |
| • Developed
for exact adjustment and alignment of
terrestrial antennas (off-air) Over the air
(OTA) |
| • LCD
display for signal strength in form of
thermometer scales and number 0-99 |
| • Digiair
shows a single channel or six channels at the
same time. You can view signal in spectrum
mode. |
| • You
can feed voltage (5 Volt) to external
active-amplified antennas. Short-circuit
protection by automatic fuse. |
| • Charged
via External DC Power source of 14-20 volts |
| • 1
Year Warranty on Meter |
| • Meter
does not come with splitter |
DIGIAIR PRO Features
- Input Frequency: 47-862MHz
- Input Level: 25-100dBuV
- Input Impedance: 75 Ohm, F-connectors
- Short-Circuit Protection: Automatic fuse on
antenna input
- Indications: Antenna voltage 5V on/off
- Power Supply: External DC Power supply
12-18V (Center-pin+)
- Power Consumption: Ca 230 mA
- Display: 128x64 Pixels (LCD)
- Battery: 600 mAh 8.4 V
- Weight: 0.3 Kg, 0.66 lbs
- Dimensions: 1234 x 55 x 35 mm
- Includes Carrying Case, Power Supply, and
Car Charger
Measuring Method
- Signal presentation on LCD screen display in
form of thermometer-scales. Spectrum display or
three digit number. Pitch tone indication on
built-in loudspeaker.
Signal Level Readout
- Thermometer scales showing max hold &
current signal level. Three digit number showing
highest value when measuring on a single
channel. Highest tone on loudspeaker. Max-hold
function.
|